Online PDF Repair Manual Download link for Audi TT. This manual is how to install Figure Grille Set in Audi TT. You can find about how to installation, removal, repair manual other for your car.
Installation Summary :
1) REMOVE OEM GRILLES
1.1) Passenger-Side Vent Grille – Begin by removing the license plate and license plate holder from the front of the vehicle. Next, Remove the passenger-side vent grille by placing a flat-head screwdriver through the front of the grille, prying down on the retaining clip (#1 in Fig. 1), and then pulling the corner of the grille toward you. This grille should release very easily.
Figure 1. Only three clips hold passenger side grille in place. Releases #1 using a flat-head screwdriver through the grille, then peel the rest of the grille free.
1.2) Center-lower Grille – You will now be able to reach from the passenger-side vent grille opening through to center grille fasteners (Indicated by arrows in Fig. 2). Press down on the fastener and then push the center grille out of the opening. There are 16 of these fasteners, and the easiest way to remove this grille, is by starting at the upper corner closest to the passenger side vent grille. Once this corner is released, you should be able to “peel” the rest of the grille out of the opening fairly easily. The proper method is to press each of the 16 fasteners down and then push, however space is tight and using the “peel” method does no damage.
We found this information in search engine is available on the internet. None of those materials are hosted in this server nor uploaded by me in someone’s servers. Read our DISCLAIMER for more detail.
